Selection of Brush DC Motors – Feeding, Loading

  • Deutsch
  • English (United States)
  • Español de México
  • Français
  • Italiano

Selecting by Feeding

Motors for feeding require high-speed precision cogging torque, low noise and long life. Due to the mechanical configuration, the flat type motor is used. Motor output is basically proportional to the voltage used and the motor size, so selecting the largest size allowable is best for power consumption and the life of the machine. To match the set you choose, please select the motor size and rated voltage, shape of input terminal and shaft dimensions.

Selecting by Loading

Motors for loading require high torque, low noise and long life. Due to the mechanical configuration, both the flat type and round type are used. Motor output is basically proportional to the voltage used and the motor size, so selecting the largest size allowable is best for power consumption and the life of the machine. To match the set you choose, please select the motor size and voltage range, starting torque, shape of input terminal and shaft dimensions.

Appearance shape matrix

Brush DC Motors by Feed Loading

 

Characteristic – Feeding, Loading type

Rated

Voltage
(V)
Voltage Range
(V)
Rated Load
(mNm)
Starting Torque
(mNm)
Rated Load Speed
(rpm)
PYN13 3.0 0~4.0 0.1
(1gf.cm)
0.4 17,900
PNN3 1.5 0~3.0 0.03
(0.3gf.cm)
0.09 8,200
PNN7 1.5 0~3.0 0.1
(1gf.cm)
0.23 5,600
PNN13 3.0 1.0~4.0 0.15 (1.5gf.cm) 0.5~0.6 8900~12000
PKN7 2.0 0~4.5 0.2
(2gf.cm)
0.4~0.6 3790~7050
PKN12 3.0 0~4.5 0.2
(2gf.cm)
0.63~0.9 7250~10540
M1N6 3~5 1.0~6.0 0.2~0.3
(2~3gf.cm)
0.67~2.07 5980~15600
M1N10 2~5 0.5~8.0 0.2~0.3
(2~3gf.cm)
0.78~1.90 3010~11220
PPN7 2.5~6.0 1.0~7.5 0.1~0.5
(1~5gf.cm)
0.68~2.88 2600~11600
PPN13 2.0~9.6 1.0~11.0 0.2~1.47
(2~15gf.cm)
1.37~4.08 2700~9700
PWN10 6.0~12.0 5.0~12.0 1.96
(20gf.cm)
5.2~9.5 4870~8400
PAN14 12.0 9.0~14.5 10.0
(102gf.cm)
35.40 9,730
MXN13 6.0~12.0 3.0~14.0 2.9~4.9
(30~50gf.cm)
8.83~13.73 1900~4520
MDN1 2.0 0.7~6.0 0.29(3g.cm) 0.8~1.1 1360~2250
MDN2 2.0~5.0 0.7~6.0 0.39~1.47
(4.0~15gf.cm)
1.2~2.8 2750~2900
MDN3 2~3 0.7~6.0 0.39
(4gf.cm)
1.2~2.8 1480~2590