Flat Brush DC Motor Selection Guide

  • German
  • English
  • French
  • Italian

Selecting Your Brush DC Motor by Shape – Flat type

Motor shapes can generally be divided into flat and round types. The flat type is mainly used for feeding and loading. The round type is mainly used for spindles, but can also be used for feeding and loading. Motor output is basically proportional to the voltage used and the motor size, so selecting the largest size allowable is best for power consumption and the life of the machine. Even when using the same size motor, the output and current consumption, starting torque and cogging torque will vary depending on the type of magnet used and the winding specifications, so please check the characteristics for each type of motor.

How do feeding DC motors work? The idea of a feeding motor is that the turning action of the motor continually moves something through an apparatus, essentially “feeding” the apparatus with the object being acted on by the motor. A perfect example is an assembly line conveyor belt. The belt needs to keep moving so that the items on the belt can be used for whatever is being manufactured. A flat or rectangular brush DC motor is attached to the belt so that as the brush DC motor turns, the belt turns, fed through the conveyor line by the DC motor.

Although described as “flat,” these DC electric motors are naturally not completely flat; they simply have flat sides, as opposed to round DC motors which, as explained, are more effective for spindles and other rotating apparatuses where the bulging nature of the round DC motor will not get in the way. This reality means that the size of the rectangular DC you choose is very important. Take note of where this brush type DC motor is going. Note the maximum height and length that will fit in the application and check those parameters against the guide when choosing your flat brush version of DC electric motor.

Appearance shape matrix



Flat brush DC motor appearance shape matrix

The appearance size of each type

Unit (mm)
Outside Diameter Height Length Shaft
Diameter
Mounting
Tap
Tap Pitch Input
PYN13 7.0 4.7 20.0 0.8 M1.2 4.3 Terminal
PNN3 8.0 6.0 10.0 1.0 M1.2 5.5 Terminal
PNN7 8.0 6.0 14.5 1.0 M1.2 5.5 Terminal
PNN13 8.0 6.0 20.0 1.0 M1.2 5.5 Terminal
PKN7 10.0 8.0 15.0 1.0 M1.4 7.2 Terminal
PKN12 10.0 8.0 20.0 1.0 M1.4 7.2 Terminal
M1N6 12.0 10.0 15.0 1.0 M1.4 8.5 Terminal
M1N10 12.0 10.0 20.0 1.0 M1.4 8.5 Terminal
PPN7 15.5 12.0 18.6 1.5 M2 10.0 Terminal
PPN13 16.1 12.1 26.5 1.5 M2 10.0 Terminal
PWN10 20.4 14.9 25.1 2.0 M2 12.4 Terminal
PAN14 24.2 18.3 30.5 2.0 None - Terminal