[Skip to Content]

Beam type CBE1-C3 series

Beam type CBE1-C3 series


  • Beam type load cell with all stainless steel construction.
    Suitable for weighing systems with limited height at the mounting point.
    Accurate and reliable model (OIML-R60 Class C3 certified)


OIML Standard
OIML accuracy classOIML R60 C3
Maximum scale interval3000
Model No. (Capacity)10K20K50K100K200K
Rated capacity10 kg20 kg50 kg100 kg200 kg
Minimum detected scale (Vmin)1 g2 g5 g16.67 g33.33 g
Safe overload150 %R.C.
Ultimate overload200 %R.C.
Rated output2 mV/V±0.003 mV/V
Non-linearity0.023 %R.O.
Hysteresis0.023 %R.O.
Repeatability0.010 %R.O.
Creep0.016 %R.O./30 min.
Creep recovery0.016 %R.O./30 min.
Excitation, recommendedDC12 V or less
Excitation, maximumDC20 V
Zero balance±0.02 mV/V
Input resistance350 Ω ~ 450 Ω
Output resistance345 Ω ~ 355 Ω
Insulation resistance2 000 MΩ or more (DC50
V) (between bridge and main body)
Temp. range, compensated-10 ℃ ~ 40 ℃
Temp. range, safe-20 ℃ ~ 80 ℃
Temp. effect on zero0.014 %R.O./10 ℃
Temp. effect on output0.012 %LOAD/10 ℃
Cableφ6.3, 4-cores shielded
5 m cable directly attached with
Y-type crimp terminal lugs at cable
Class of protectionIP67 or equivalent
Material of elementStainless steel
Durability1 000 000 times with
rated load applied.

Table of P/N

Parts No.Rated capacityNatural frequencyRated displacementWeight
CBE1-10K-C310 kg384 Hz0.21 mmApprox. 0.73 kg
CBE1-20K-C320 kg420 Hz0.21 mmApprox.0.76 kg
CBE1-50K-C350 kg555 Hz0.25 mm
CBE1-100K-C3100 kg1 250 Hz0.23 mm
CBE1-200K-C3200 kg1 428 Hz0.32 mm


CAD files (DXF)Specification sheet (PDF)Instruction manual (PDF)
CBE1-5K~50K (69KB)
CBE1-100K, -200K (63KB)
No.KT53389-2 (83KB) No.ENKT60242-1 (58KB)
Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.

Connect with NMB Technologies Corporation