[Skip to Content]

C2G1-A Series General Specs

C2G1-A Series

C2G1 - A


  • Mid. capacity.
  • Suitable for thin weighing scale.
  • OIML certification & NTEP approved.


General Spec.
Rated capacity58.84 N{6 kgf}~490.3 N{50 kgf}
Safe overload150 % R.C.
Ultimate overload200 % R.C.
Rated output2 mV/V±0.2 mV/V
Non-linearity0.015 % R.O.
Hysteresis0.015 % R.O.
Repeatability0.02 % R.O.
Creep0.02 % R.O./30 min
Creep recovery0.02 % R.O./30 min
Excitation, recommended≤12 V
Excitation, maximum20 V
Zero balance±0.1 mV/V
Input resistance400 Ω ~ 450 Ω
Output resistance345 Ω ~ 355 Ω
Insulation resistance≥2 000 MΩ (DC 50 V) (between bridge and main body)
Temp. range, compensated-10 ℃ ~ 50 ℃
Temp. range, safe-10 ℃ ~ 50 ℃
Temp. effect on zero0.04 % R.O./10 ℃
Temp. effect on output0.012 % LOAD/10 ℃
Cableφ3.2, 4-cores shielded 40 cm cable directly attached and cable ends is separated.
Class of protectionIP64 or equivalent
Material of elementAluminum alloy
Durability1,000,000 times with rated load applied
Effect of eccentric load・ C2G1-6K to 35K
– Size of loading plate is 300 mm x 300 mm at maximum.
– The center of loading plate and the center of load cell should be the same position
– Error is within 0.02 % R.O. applied with 1/2 of rated capacity at the position of 75 mm of eccentricity.

Table of P/N

Parts No.Rated capacityNatural frequencyRated displacementWeight
C2G1-6K-A58.84 N {6 kgf}220 Hz0.62 mmApprox. 200 g
C2G1-10K-A98.07 N {10 kgf}295 Hz0.53 mm
C2G1-12K-A117.7 N {12 kgf}323 Hz
C2G1-15K-A147.1 N {15 kgf}360 Hz
C2G1-20K-A196.1 N {20 kgf}373 Hz0.65 mm
C2G1-25K-A245.2 N {25 kgf}417 Hz
C2G1-30K-A294.2 N {30 kgf}455 Hz
C2G1-35K-A343.2 N {35 kgf}493 Hz
C2G1-50K-A490.3 N {50 kgf}540 Hz0.67 mm


CAD files (DXF)Specification sheet (PDF)Instruction Manual (PDF)
No.ENKT60245-1-G (31KB)
Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.

Connect with NMB Technologies Corporation