[Skip to Content]

Previously Searched

Compression type CMP1

Compression type CMP1

CMP1

Feature

  • Precise low-profile load cell for compression service. All stailess steel construction

Specifications

Rated capacity 2.452 kN {250 kgf}~196.1 kN {20 tf}
Safe overload150 %R.C.
Ultimate overload200 %R.C.
Rated output2 mV/V±0.005 mV/V
(CMP1-250K : 1 mV/V±0.005 mV/V)
Non-linearity0.05 %R.O.
Hysteresis0.05 %R.O.
Repeatability0.05 %R.O.
Excitation, recommended12 Vor less
Excitation, maximum18 V
Zero balance±0.02 mV/V
Input resistance350 Ω±3.5 Ω
Output resistance350 Ω±5 Ω
Insulation resistance2 000 MΩ or more (DC50
V) (between bridge and main body)
Temp. range, compensated-10 ℃ ~ 70 ℃
Temp. range, safe-20 ℃ ~ 80 ℃
Temp. effect on zero0.05 %R.O./10 ℃ (CMP1-250K : 0.10
%R.O./10 ℃)
Temp. effect on output0.10 %LOAD/10 ℃
Cableφ7, 4-cores shielded
10 m cable directly attached,
Y-crimp type terminal lugs are attached at cable
end.
Class of protectionIP68 or equivalent
Material of elementStainless steel
Durability1 000 000 times with
rated load applied.

Table of P/N

Parts No.Rated capacityNatural frequencyRated displacementWeight
CMP1-250K2.452 kN {250 kgf} 1 900 Hz0.03 mmApprox.1.8 kg
CMP1-500K4.903 kN {500 kgf}2 600 Hz0.06 mm
CMP1-1T9.807 kN {1 tf}4 000 Hz
CMP1-2T19.61 kN {2 tf}9 000 Hz
CMP1-5T49.03 kN {5 tf}12 000 Hz0.07 mm
CMP1-10T98.07 kN {10 tf}0.11 mmApprox.2.0 kg
CMP1-20T196.1 kN {20 tf}0.14 mmApprox.3.7 kg

Download

CAD files (DXF)Specification sheet (PDF)Instruction Manual (PDF)
CMP1-250K (28KB)
CMP1-10T (28KB)
CMP1-20T (28KB)
No.KT51168-2-D (145KB) No.KT60244-1-H (68KB)
Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.
 

Connect with NMB Technologies Corporation