[Skip to Content]

Compression type digital load cell DC002 series

Compression type digital load cell DC002 series

CC002 - * - NS

Feature

  •  
     Excellent noise tolerance
    An amount of the lightening surge is increased by the internal measures parts
     High precision measurement can be performed by the excellent temperature compensation.
    Temperature error is compensated by measuring the temperature at gage section with the internal temperature detecting part.
     CE mark applicable
     Approved OIML R60 class C6
     Decrease the error factor with the use of an amplifier.
     Improvement of maintenance efficiency
     The calibration function of four corner adjustment, etc., is simplified by the use of a special indicator CSD-401.

Specifications

OIML Standard
OIML accuracy classOIML R60 C6
Maximum scale interval6 000
Model No. (Capacity)10T20T25T30T40T
Rated capacity10 t20 t25 t30 t40 t
Minimum detected scale (Vmin)0.625 kg1.25 kg1.563 kg1.875 kg2.5 kg
Safe overload150 %R.C.
Ultimated overload200 %R.C.
Rated output1 000 000 count±500 count
Non-linearity0.012 %R.O.
Hysteresis0.012 %R.O.
Repeatability0.010 %R.O.
Creep0.008 %R.O./30 min
Zero return0.008 %R.O./30 min
Power supply voltageDC7.5 V ~ DC15 V
Power consumptionDC35 mA (at DC12 V of power supply)
Insulated resistance

100 MΩ以上 (DC50 V)

Temp. range, compensated-10 ℃ ~ 40 ℃
Temp. range, safe-20 ℃ ~ 70 ℃
Temp. effect on zero balance0.014 %R.O./10 ℃
Temp. effect on output0.010 %LOAD/10 ℃
Degital output 
SignalDifferential signal (Conforming to RS-485)
Data output frequency160 times/s at maximum
Baud rate57 600 bps
Data bit length7 bit
Parity bitOdd
Stop bit1 bit
TerminatorCR
Transmission methodHalf duplex
Synchronous methodStart-stop synchronization
Address0 ~ 9
No. of Connectable unitUp to 8 units
Transmission dataASCII Code
Standard functionDigital filter, Stabilization filter, A/Z, A/Z OFF
Cableφ7.0, 4-cores shielded 12 m cable and cable end is separated.
(DC002-40T : 15 m cable)
Protection classIP68 or equivalent
Material of elementAlloy steel
Material of coverStainless steel (lost wax)
Allowable horizontal moving length

10 mm (Please set the stopper of truck scale within 5 mm.)
Recomended movable range is 2 mm ~ 3 mm.

Accessory

Guide ring, Inspection data sheet

Table of P/N

Parts No.Rated capacityNatural frequencyRated displacmentWeight
DC002-10T10 t3 900 Hz0.2 mmApprox.4.5 kg
DC002-20T20 t5 500 Hz
DC002-25T25 t6 000 Hz
DC002-30T30 t6 700 Hz
DC002-40T40 t5 600 HzApprox.6.5 kg

Download

CAD data (DXF)Specification sheet(PDF)
DC002-10T ~ 30T (224KB)
DC002-40T (208KB)
Mounting attachment
AIC-005B (142KB)
No.KT52892-2-E (214KB) No.ENKT60708-1 (132KB)
Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.
 

Connect with NMB Technologies Corporation