[Skip to Content]

Double convex type CC010-C3 series

Double convex type CC010-C3 series

Compression type for industrial weighing systems CC010 series


  • As equipped with the auto alignment funtion, ideal for applying on hoppers, tank scales and weighing systems.
    Hermetically sealed stainless steel construction providing excellent protection in hazardous environment.
    Same height and diameter for all capacities.
    High-accuracy and High reliability
    (OIML-R60 Class C3 certified.)


OIML Standard
OIML Accuracy classOIML R60 C3
Maximum scale interval3 000
Model No. (Capacity)2T3T5T10T20T30T50T
Rated capacity2 ton3 ton5 ton10 ton20 ton30 ton50 ton
Minimum detected scale (Vmin)0.333 kg0.5 kg0.833 kg1 kg2 kg3 kg5 kg
Safe overload150 %R.C.
Ultimate overload200 %R.C.
Rated output2 mV/V±0.002 mV/V
Non-linearity0.023 %R.O.
Hysteresis0.023 %R.O.
Repeatability0.010 %R.O.
Creep0.016 %R.O./30 min
Creep recovery0.016 %R.O./30 min
Excitation, recommended12 V or less
Excitation, maximum20 V
Zero balance±0.02 mV/V
Input resistance693 Ω ~ 707 Ω
Output resistance695 Ω ~ 705 Ω
Insulation resistance5 000 MΩ or more (DC50 V)(between bridge and main body)
Temp. range, compensated-10 ℃ ~ 40 ℃
Temp. range, safe-20 ℃ ~ 70 ℃
Temp. effect on zero0.014 %R.O./10 ℃
Temp. effect on output0.012 %LOAD/10 ℃
CableCC010-2T~3T :
φ7.0, 4-cores shielded 5 m cable directly attached, cable end is separated
CC010-5T~50T :
φ7.0, 4-cores shielded 10 m cable directly attached, cable end is separated
Class of protectionIP68 or equivalent
Material of elementStainless steel
WeightApprox. 5 kg

Table of P/N

Parts No.Rated capacityNatural frequency (Hz)Displacement (mm)
CC010-2T-C32 ton6 8000.06
CC010-3T-C33 ton8 100
CC010-5T-C35 ton6 100
CC010-10T-C310 ton2 0000.13
CC010-20T-C320 ton2 7000.15
CC010-30T-C330 ton3 1000.16
CC010-50T-C350 ton3 4000.19


CAD files (DXF)Specification sheet (PDF)
CC010-2T~3T (34KB)
CC010-5T (34KB)
CC010-10T~30T (39KB)
CC010-50T (34KB)
No.KT53425-2-B (79KB)
Mounting Attachment AIC-035B-S No.
EN216113-E (103KB)
AIC-035B No.
EN216114-E (102KB)
Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.

Connect with NMB Technologies Corporation