[Skip to Content]

FSU series

FSU series

FSU

Feature

  • Aluminum single point load cell, full bridge type

Specifications

Rated capacity4.903
N{0.5 kgf}~147.1 N{15 kgf}
Safe overload450 %R.C.
Ultimate overload600 %R.C.
Rated output0.5 mV/V±0.05 mV/V
(FSU-0.5K : 0.5 mV/V±0.075 mV/V)
Non-linearity0.1 %R.O.
Hysteresis0.1 %R.O.
Repeatability0.1 %R.O.
Creep0.15 %R.O./20 min
Creep recovery0.15 %R.O./20 min
Excitation, recommended5 V or less
Excitation, maximum8 V
Zero balance±0.4 mV/V
Input resistance340 Ω±50 Ω
Output resistance340 Ω±50 Ω
Insulation resistance1 000 MΩ or more (DC50
V) (between bridge and main body)
Temp. range, compensated0 ℃ ~ 60 ℃
Temp. range, safe-10 ℃ ~ 80 ℃
Temp. effect on zero±1 %R.O./10 ℃
Temp. effect on output±1 %LOAD/10 ℃
Lead wireAWG30, 150 mm directly attached, cable end is separated
Class of protectionIP00 or equivalent
Material of elementAlluminium alloy
WeightApprox. 30 g
Durability1 000 000 times with
rated load applied.
Effect of eccentric load– The center of loading
plate and also the center of load cell should be
the same position.
– Error is within 0.8 %R.O. applied with 1/2 of
rated capacity at the position of 50 mm of eccentricity.

Table of P/N

Parts No.Rated capacity
FSU-0.5K4.903 N {0.5 kgf}
FSU-1K9.807 N {1 kgf}
FSU-2K19.61 N {2 kgf}
FSU-5K49.03 N {5 kgf}
FSU-15K147.1 N {15 kgf}

Download

CAD files (DXF)Specification sheet (PDF)Instruction Manual (PDF)
FSU-0.5~15K (32KB) No.215220 (28KB)No.KT60248-1 (41KB)
Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.
 

Connect with NMB Technologies Corporation