[Skip to Content]

PRO Series

PRO Series



  • Compact and light weight φ15 mm x 33 mm, approx. 25 g
    Screw M10 x P1.0
    Non-linearity 0.5 % R.O. / Hysteresis 0.5 %
    Safe temperature range: -30 ℃ ~ 150 ℃
    Compact flash diaphragm type (bolt shape)
    High response and no need to pull out the pressure inlet.
    – Industrial machine that measures pressures such as adhesive, paste, paints and grease.
    – Experimental uses for automotive such as hydraulic brakes and air conditioner compressors.
    – Testing is set so that it gives priority to high response.


Rated capacity2 MPa ~ 20MPa
Safe overload150 % R.C.
Ultimate overload200 % R.C.
Rated output±1.0 mV/V±0.3 mV/V
Non-linearity0.5 % R.O.
Hysteresis0.5 % R.O.
Excitation, recommendedDC 1.5 V / AC2.0 V
Excitation, maximumDC 3 V
Zero balance±1.6 mV/V
Input resistance350 Ω±40 Ω
Output resistance350 Ω±40 Ω
Insulation resistance≥1,000 MΩ (DC 50 V) (between bridge and main body)
Temp. range, compensated-30 ℃ ~ 150 ℃
Temp. range, safe-40 ℃ ~ 160 ℃
Temp. effect on zero0.8 % R.O./10 ℃
Temp. effect on output0.8 % LOAD/10 ℃
Cableφ3.8, 4-cores 30 cm cable directly attached
Class of protectionIP64 or equivalent
Material of elementStainless steel
Mounting screwM10 x P1.0
WeightApprox. 25 g

Table of P/N

Parts No.Rated capacity
PRO-10MP10 MPa
PRO-20MP20 MPa


CAD files (DXF)Specification sheet (PDF)Instruction manual (PDF)
PRO (41KB)No.KS50797-2
Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.

Connect with NMB Technologies Corporation