[Skip to Content]

Square beam type C2B1B series

Square beam type C2B1B series

Square beam type C2B1B

Feature

  • High precision, hermetically sealed all stainless
    steel load cell. Suitable for the weighing system to floor scale, tank scale and hopper scale. The combination with locker pin for automatic aligning function enables the high precision measurement. Available for OIML R60 Class C3 model.

Specifications

General Spec.
Rated capacity200 kg (1.961
kN) ~ 2 ton (19.61 kN)
Safe overload150 %R.C.
Ultimate overload200 %R.C.
Rated output2 mV/V±0.002 mV/V (C2B1B-200K:1.6 mV/V±0.002 mV/V)
Non-linearity0.025 %R.O.
Hysteresis0.025 %R.O.
Repeatability0.025 %R.O.
Creep0.03 %R.O./30 min
Creep recovery0.03 %R.O./30 min
Excitation, recommended12 V or less
Excitation, maximum20 V
Zero balance±0.02 mV/V
Input resistance380 Ω ~ 460 Ω
Output resistance345 Ω ~ 355 Ω
Insulation resistance2 000 MΩ or more (DC50
V) (between bridge and main body)
Temp. range, compensated-10 ℃ ~ 70 ℃
Temp. range, safe-20 ℃ ~ 80 ℃
Temp. effect on zero balance0.05 %R.O./10 ℃
Temp. effect on output0.02 %LOAD/10 ℃
Cableφ4.7, 4-cores shielded
6 m cable directly attached with Y-crimp type terminal
lugs at cable end.
Class of protectionIP68 or equivalent
Material of elementStainless steel
Durability1 000 000 times with
rated load applied.

Table of P/N

Parts No.Rated capacityNatural frequencyRated d isplacementWeight
C2B1B-250K200 kg (1.961 kN)1 000 Hz0.15 mmApprox.0.8 kg
C2B1B-200K250 kg (2.452 kN)
C2B1B-500K500 kg (4.903 kN)0.2 mm
C2B1B-1T1 t (9.807 kN)0.3 mm
C2B1B-2T2 ton (19.61 kN)1 500 Hz0.5 mmApprox.1.5 kg

Download

CAD files (DXF)Specification sheet (PDF)Instruction manual (PDF)
C2B1B-200K ~ 1T(29KB)
C2B1B-2T (29KB)
No.KT52635-2-E (80KB) No.ENKT60242-1 (58KB)
Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.
 

Connect with NMB Technologies Corporation