[Skip to Content]

Previously Searched

UTA series

UTA series

UT

Feature

  • The measuring capacity of UT series is a little higher than the UL series. It is a push-pull type.

Specifications

Rated capacity980.7
mN{100 gf}~19.61 N{2 kgf}
Safe overload150 %R.C.
Ultimate overload150 %R.C.
Rated output±2 mV/V±0.4 mV/V
(UTA-100GR:±1.75 mV/V±0.35 mV/V or more)
Non-linearity0.2 %R.O.
Hysteresis0.2 %R.O.
Repeatability0.2 %R.O.
Excitation, recommended3 V or less
Excitation, maximum6 V
Zero balance±0.2 mV/V (UTA-100GR:±0.175
mV/V)
Input resistance270 Ω±40 Ω
Output resistance270 Ω±40 Ω
Insulation resistance1 000 MΩ or more (DC50
V)
Temp. range, compensated0 ℃ ~ 50 ℃
Temp. range, safe-10 ℃ ~ 60 ℃
Temp. effect on zero0.5 %R.O./10 ℃
Temp. effect on output0.5 %LOAD/10 ℃
Cable4-cores parallel vinyl
60 cm directly attached, cable end is separated
Class of protectionIP30 or equivalent
Durability1 000 000 times with
rated load applied.

Table of P/N

Parts No.Rated capacityNatural frequencyRated displacementWeight
UTA-100GR980.7 mN {100 gf}300 Hz±0.4 mmApprox.110 g
UTA-200GR1.961 N {200 gf}440 Hz
UTA-500GR4.903 N {500 gf}700 Hz
UTA-1K9.807 N {1 kgf}980 Hz
UTA-2K19.61 N {2 kgf}1 310 Hz

Download

CAD files (DXF)Specification sheet (PDF)Instruction Manual (PDF)
UT-100GR~2K (45KB)No.KT52881-2 (151KB)No.KT60243-1 (34KB)
Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.
 

Connect with NMB Technologies Corporation